Mr.Paldu Holzspalter 1050, Руководство по эксплуатации

Страница: 9 / 36

Page 7
Operating the log splitter
Note:
We cannot grant any warranty
replacements for such damages at the
switch resulting of above.
 Check direction of rotation:
Switch motor on and off and observe
rotation direction before motor stops.
Caution!
An incorrect rotation direction
may cause pump breakage!
Splitting Operation
Stand the log on the mounting table
between both hand grips under the
riving knife. Pay attention to the com-
position of the log (branches, etc.).
Fig. 4 - Two-hand control lever
Then move the log into the right posi-
tion using both hand grips. Pull both
cable hand grips at the same time to
trigger off a splitting stroke. The riving
knife cleaves into the wood and splits
it.
As soon as just one of the cable hand
grips is released, the riving knife stops
moving. If both hand grips are released,
the riving knife returns to the starting
position.
Caution!
The machinery has been
designed for single-man operation only!
The log must not be held by a helper
during splitting and the return stroke