Mr.Ken LA NEW ABS 56", Руководство пользователя

Страница: 11 / 12

Step 1 –
( Turn off the main power supply in the circuit breaker box,
before commencing the installa
ti
ons.)
1. Make wires connec�on according to the wiring instruction
in the rear page.
2. Remove the wall control front plate using a flat and small
screwdriver.
3. Mount the wall control unit onto wall outlet box with the
provided two screws firmly.
( Can be installed ver
ti
cally or horizontally.)
4. Replace the front plate.
5. Replace the power supply; the wall control is now ready for
operation.
CAUTION:
This is NOT a 360 -degree rotate switch,
must turn counterclockwise 3-2-1-0
to switch the fan off
s p i T l o r t n o C d e e p S n a F - 2 p e t S
1. In case the fan is a pull chain Set the pull chain switch.
Keep in posi
ti
on "High speed" if your ceiling fan
Set the speed control switch.
2. You can now turn the knob clockwise.
To control the fan speed (respec
ti
vely)
Turns off 0 fans
1 - 4 Adjust the fan speed. Chasing from low speed
To the high speed
 ° µ  ª
ิ
7 4
Moter & Blade Installa on
3.1 Upside the blade , Fasten Blade onto motor assembly hole using wahers & motor screws provided
from hardware bag. (Or fix in the Motor housing)
3.2. Then remove the two nuts a ached to the motor. The propeller to the same. Put the nut back to the
ghtening.
Hanging the fan
4.
1
Check whether the installation is strong enough to be installed.
4.2
Hold the base with the nut in the desired position. The position is already prepared for the cable.
4.3
. Composed of pipes and ball Insert the power cord and connect it to the motor. completed Go in to
hang Turn down the lock. After that, move the watch to make sure it is strong. If the ball is locked, it can
not move.
Ceiling
Hanger
Bracket
Hanger
Bracket
Ridge
Ball Notch
ต ตั ว 0 5 1 ดุ ส งู ส ด ล ห โ , z H 0 5 / V 0 4 2- V 0 2 2 C A น า ด พ เ ม ล ดั พ บั ร ห าํ ส ะ า ม ห เ (
7 4