3
Operating Instructions and Owner’s Manual
ENERCO GROUP, INC. | Gas-Fired Infra-Red Portable Heater
HOOK-UP INFORMATION
1
.
Heater model MH11Q is packaged completely
assembled. Propane cylinders are not included with
model MH11Q.
2.
Remove heater from carton.
3.
Hold heater in one hand and with the other hand hold
propane cylinder vertically and carefully turn clockwise
into heater valve until snug. (Careful not to cross-
thread) – Figure 1.
4.
Use only LP-gas cylinders constructed for use with
propane only (HD-5) and marked in accordance with
the specifications for LP-gas cylinders of the U.S.
Department of Transportation (DOT Spec. 39).
5.
Use propane fuel cylinders of not more than 75 cubic
inches (2-1/2 pounds nominal water capacity) and
connect to cylinder valve outlet connection No. 600 as
specified in the Compressed Gas Associations Limited
Standard Cylinder Valve Outlet Connection for
propane-small valve series.
WARNING
• Never touch heater while in operation to
avoid injury.
Move heater by grasping
the propane cylinder carefully.
• Read pages 3 and 4 before
lighting heater.
WARNING
•
STOP-LOOK-READ-UNDERSTAND
these
warning instructions to avoid serious
injury, fire, asphyxiation or death.
•
DO NOT
LEAVE HEATER UNATTENDED OR
IN OPERATION WHILE SLEEPING.
•
NOTE: DO NOT
USE MATCHES FOR LEAK
TESTING. USE ONLY SOAP SOLUTION.
