3
Operating Instructions and Owner’s Manual
Grand Teton Wood Pellet Fire Stove
SPECIFICATIONS
Model #
PS20WTS
DIMENSIONS
Stove Weight
[LBS (kg)]
143.3 (65)
Stove Dimenions LxWxH
[in. (cm)]
18.25” x 20“ x 28.5”
(46.36 x 50.8 x 72.4)
Air Inlet Pipe Diameter
[in. (mm)]
1.25” (32)
Air Outlet Pipe Diameter
[in. (mm)]
3” (80)
Pellet Hopper Capacity
[LBS (kg)]
17.6 (8)
OPERATION SPECIFICATIONS
Fuel
Wood Pellet
Heats approximately [ft
2
(m
2
)]**
431-646 (40-60)
Carbon Monoxide Produced (g/hr)
0.00
Pellet Consumption Rate High [LBS/HR (kg/HR)]
3.01 (1.37)
Pellet Consumption Rate Medium [LBS/HR (kg/HR)]
1.39 (0.63)
Pellet Consumption Rate Low [LBS/HR (kg/HR)]
1.21 (0.55)
Automatic Mode Duration [minimum hours
(maximum hours)]
7 (13)
Stove Efficiency
86.5%
Rate [BTU/HR (kW)] - HIGH
21,064 (6.17)
Rate [BTU/HR (kW)] - MED
10,249 (3.00)
Rate [BTU/HR (kW)] - LOW
9,072 (2.66)
ELECTRICAL SPECIFICATIONS
Electrical Supply Requirements [Voltage /
Frequency / Phase]
120V / 60 Hz / Single
Electric Current During Lighting Phase [Amperes]
3.3
Auger Motor R.P.M.
2.4
*BTU input/output will vary, depending on the brand of fuel you use in your Stove
** Depending on climate zone. Variations in climate and location affect attributes such as stove efficiency
and CO produced.
This manual describes the installation and operation of the brand “Grand Teton” wood pellet fire stove. This stove
meets the applicable U.S. Environmental Protection Agency’s emission limits for pellet fired heaters sold after
2020.
