![Mr. Entertainer KAR122C Скачать руководство пользователя страница 7](http://html.mh-extra.com/html/mr-entertainer/kar122c/kar122c_user-and-safety-manual_1844914007.webp)
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
REMEDY
Unit is ON but there is low or no
volume
The master volume control has been
turned all the way down.
Turn the master volume control to a
higher output.
CD player of Karaoke System does
not work normally or the “No”
appears on the LED DISPLAY.
Disc is inserted upside down.
Insert disc correctly.
Disc is dirty.
Wipe it clean with soft cloth.
Disc is scratched.
Use a new disc.
Disc is warped.
Use a new disc.
A non-standard disc is inserted.
Only use compatible discs
mentioned in this manual.
Lens is dirty.
Clean the optical pickup with a CD
lens cleaner.
Moisture has condensed inside the
CD deck.
Wait about 20 to 30 minutes to let
it dry out.
Karaoke system needs to be reset.
Disconnect the machine from power
source for 30 seconds.
No sound - If audio is going through
TV/ home stereo
Source Selection on your TV/home
stereo is not set properly.
Select AV INPUT as the source for
your TV/home stereo.
Improper connection to stereo
system or PA.
Follow directions on ‘Audio/Video
Output’ section for connecting to a
home stereo system.
No song lyrics appear on the TV
screen (CDG Mode Only)
Video cable is not connected
properly to the TV.
Connect the video cable to the
VIDEO OUT of the unit and to the
TV’s Video In jack.
Source selector on TV is not set to
VIDEO or A/V IN.
Use your TV Remote to select VIDEO
or A/V input.
TV does not have video line input.
Connect from VIDEO OUT of the unit
to a RF modulator and then to the
TV cable input.
A CD+G disc is loaded but the CDG
indicator is not lit.
Check the disc to be sure it is a
CD+G. Check disc to ensure it is
clean.
No image on TV screen
TV input is not properly set.
Set TV input to correct A/V input that
is connected to the unit.
Cannot sing through the mic
Improper MIC volume setting.
Adjust MIC and MASTER VOLUME
CONTROLS to appropriate levels.
MIC is off.
Turn on MIC with the ON/OFF switch
located on the microphone.
MIC is not properly plugged in.
Insert the mic plug fully into either
MIC 1 or MIC 2 JACK of the unit
properly.