MR Aerodesign DHC-2 Beaver, Руководство по эксплуатации, Страница: 26 / 34

V
HH HH
JJ
JJ
-Glue Fin and Stab
on the fuselage.
-Make the dorsal fin.
Step 17
Make sure that all your servo mechanisms for the rudder and elevator are made and work correctly.
Put in a crossmember so as to have no play in the plastic elevator rod tub.
Verify your tail wheel bellcrank setup one last time and make sure all screws are set with Loc-Tite
Sheet the entire rear fuselage section. (F10 to F19)
Use 1/4" balsa sticks to make the corners of the fuselage and sand to shape.
D3
Balsa 1/8"
D4
Balsa 1/8"
D5
Balsa 1/8"
D7
Balsa 1/4"
D6
Balsa 1/4"
D-SH-1
Balsa 1/16"
D1
Balsa 1/8"
=
=
=
=
=
D2
Balsa 1/8"
3/32" sheeting
(Top of fuselage)
01-2013