PAGE 30 — MVH408DZ PLATE COMPACTOR • OPERATION MANUAL — REV. #8 (05/28/20)
MAINTENANCE
3. Slide the bar up the notches for easy access to the
battery and tighten the bolts.
4. Take off the nuts and remove the battery holder
5. After tilting the battery backward, disconnect the
battery terminal. Always disconnect the black terminal
on the negative side first.
6. Pull up the handle on the top of the battery to remove
the battery from the machine.(Figure 32). Make sure
that the battery terminals do not touch the frame.
Figure 32. Removing Battery
7. To install new battery, perform the procedure in reverse.
Make sure that the red terminal (positive side) is
connected first.
8. Loosen the two bolts on each side of the battery bracket
and slide the bracket down to lower the battery to its
original location.
9. Tighten the four bolts.
Nut
Battery holder
Battery
Handle
STORAGE
1. Wash off dirt and soil from every part with water. While
washing, be careful not to let the water splash on
the electric components such as the battery and the
engine muffler.
2. Cover the machine to prevent dust and dirt buildup.
3. Store the machine in a dry area away from direct
sunlight.
4. Do not leave the machine outdoors. Keep it indoors.
5. When not used for a long period of time, drain the fuel
from the fuel tank, and either disconnect the battery
terminals or remove the battery itself.
6. When the machine is used after a long storage period,
check the level of engine oil and battery capacity before
using.
To
order
go
to
Discount-Equipment.com
