PAGE 14 — HTX6H, STX6H TROWEL • SETUP, ADJUSTMENTS AND CALIBRATIONS — REV. #1 (09/07/17)
Engine Coolant
1. Verify that the radiator drain cock is closed.
2. Remove radiator cap.
3. Open the clam shell to access the coolant sight glass
(Figure 8).
4. Pour engine coolant (Dexcool or long life coolant only)
slowly into the radiator (Figure 7) until it is at full level
as seen through sight glass.
Figure 7. Adding Engine Coolant
Figure 8. Coolant Level
5. Place a vacuum pump over the engine coolant filler
port to remove any excess air.
6. Refill the radiator until it is full again.
7. Reinstall radiator cap.
ADD COOLANT HERE
COOLANT
FULL LEVEL
INITIAL CHECK AND ADJUSTMENTS
