© mPTech 2018. All rights reserved. Halo S+ – EN
23
23
<*> button
Used to lock the keyboard and change
slider values, text options, etc. When
writing an SMS, it displays symbols for
insertion into the content.
24
Torch On /
Off
Pressing it for 2 seconds allows you to
turn the torch on or off.
Turning the phone on/off
To turn the phone on/off press and hold the Red handset button.
If directly after turning the phone on you will see the code request,
(in form of “****”) type the code and press Menu button.
Inserting a SIM card, memory card, and the battery
If the phone is switched on - switch it off. Remove the case's back
flap - use your fingernail to raise it using the gap in the case.
Insert the SIM card - It is supposed to be placed with its gold
contacts facing down, the way in which the slot is embossed.
Insert the memory card - to open the flip of the card reader slide
it delicately down. Insert the microSD memory card with its gold
contacts facing down, the way in which the slot is embossed. close
the flip by sliding it delicately up. Insert the battery so that its
gold contacts touch the triple connector in the phone bay. Put on
and gently press down the cover until you hear the click of the
latches. Make sure the cover is well attached.
Charging the phone
Charging without the cradle charger
Connect the microUSB charger to the charger connector on your
phone, then connect the charger plug into the power grid.
*Attention: Improper connection of the charger can cause serious
damage to the phone. Damages caused by an improper use of the
phone are not covered by the warranty. The icon
(or similar)
will appear during charging and when the battery is fully charged.
When charging is complete unplug the charger from the power
outlet. Unplug the cable from the socket on the phone.
