202100709
mpsacoustics.com | 866-557-8438 | 1900 Firman Dr. Suite 800, Richardson, TX 75081
4
2) Pass the power wire(s) through the wire guide lock and connect the wires in
the green terminal block.
Note: All wiring should be carried out with 2-conductor stranded copper wire. Typical wire will be 18/2 FT4.
3.2 Connecting the Speaker
1) Unscrew and remove the cable pass-through plate
3.3 Securing the Speaker
1) Cut a hole in the ceiling tiles or drywall ceiling. The diameter of the hole is
115 mm (or 4½ inches). For best results, use a hole-saw. Make sure there are no
obstacles behind the hole and that there is enough clearance for the back of the
speaker.
