MPS MP8869S Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 11

MPS MP8869S Скачать руководство пользователя страница 3

3

MP8869S Evaluation Kit User Guide rev 1.0

MonolithicPower.com

7/17/2018

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

© 2018 MPS. All Rights Reserved.

USER GUIDE

– MP8869S EVALUATION KIT (EVKT-8869S)

Overview

Introduction

The EVKT-8869S is an evaluation kit for the MP8869S. The MP8869S is a highly integrated, high-
frequency, synchronous, step-down switcher with an I2C control interface. The MP8869S is optimized
to support up to 12A continuous/15A peak output current over an input supply range from 2.85V to 18V
with excellent load and line regulation. This kit allows for quick evaluation of the MP8869S. By using the
I2C, users can set the current limit, slew rate, work mode, and output voltage. This device also features
telemetry, which provides output voltage and output current monitoring via I2C.

Kit Contents

EVKT-8869S kit contents: (items below can be ordered separately).

#

Part Number

Item

Quantity

1

EV8869S-L-00A

MP8869SGL evaluation board

1

2

EVKT-USBI2C-02

Includes one USB to I2C communication interface, one USB
cable, one ribbon cable

1

3

Tdrive-8869S

USB flash drive that stores the GUI installation file and
supplemental documents

1

Figure 1: EVKT-8869S Evaluation Kit Set-Up

Ribbon Cable

«
1
2
3
4
5
...
»

Содержание MP8869S












Отзывы:

Нет отзывов