MPS EV2759-Q-00A Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 9

MPS EV2759-Q-00A Скачать руководство пользователя страница 9

EV2759-Q-00A 36V SW CHARGER WITH PPM FOR 1-6S BATTERIES EV BOARD

NOTICE:

The information in this document is subject to change without notice. Please contact MPS for current specifications. Users should

warrant and guarantee that third party Intellectual Property rights are not infringed upon when integrating MPS products into any application.
MPS will not assume any legal responsibility for any said applications.

EV2759-Q-00A Rev.1.0

MonolithicPower.com

9

7/29/2019

MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.

© 2019 MPS. All Rights Reserved.



The input voltage minimum limit can be selected among 10V/15V/22V/28V.

6, Connect the system load to SYS and GND connectors if you need, take care that the positive/
negative terminal must not be reversely connected.

7, Please take care that the max system load current should not exceed the input source capacity, if the
system load has the possibility of exceeding the input source output current limit, a schottky diode is
required to bypass Q1 body diode.

Notes

For the other detailed description on the operation of this part, please contact local FAE to
apply the latest datasheet.

«
...
7
8
9

Содержание EV2759-Q-00A










Отзывы:

Нет отзывов