MPS Lighting Beam&Spot 280, Руководство пользователя

Страница: 8 / 18

6.
A C Power supply
HOT BEAM Input volt
、
Power, Fuse
Input volt Power consumption Frequency
110~240V 470W 50/60HZ
Fuse Volt Current Model
250V 6A 5
×
20
Notice!! Only qualified staff are allowed to connect lighting equipment with power
Confirm the power supply is in compliance with our fixture and with overload
Production and earth leakage protection
L N Earth
RED B Yellow-green
7.
Lamp and Replacement
BEAM 280 Lamp
Brand Power Lifetime CCT
OSRMA 280W 2200Hrs 9300K
Warning
！
Using other lamp will generate hidden danger or damage
Fixture. To reduce the risk of damaging fixture, please replace
Lamp when work time is 25% longer than rated lifetime.
BEAM 280 Lamp replace
Notice
！
No touch with filament with naked hands when replacing lamp to avoid greasy dirt
sticking to filament.keep filament clean. Switch off and wait at least
20 minutes to cool fixture. Lock Y axial at position of 60
°
angle.
The replacement procedures are as below
1. As Y axial locked, unscrew the plate at back of fixture body (PIC1)