Getting started
Get to grips with the basics, and have your PC up and running in no
time.
Insert the memory card
Use
only
compatible
memory
cards
approved
for
use
with
this
device
.
Incompatible
cards
may
damage
the
card
and
the
device
and
corrupt
data stored
on
the
card.
Tip: Insert
the
memory
card
into
the
TF
card
slot
of
your
PC.
The
PC
must
be
switched
off
before
inserting
the
memory
card.
Your
PC supports
memory,
cards
with
a
capacity
of
up
to
32
GB.
For
best
performance,use
a
card
with
a
capacity
of
4
-
32
GB.
Charging your PC
Your battery has been partially charged at the factory, but you may
need to recharge it before switching the PC on for the first time.
Make sure you use a compatible USB charger to charge your PC.
1. Plug the DC charger into a wall outlet, then connect the end of the
cable to your PC.
2. When the battery is full, disconnect the charger from the PC, and
then disconnect it from the wall outlet.
You don't need to charge the battery for a specific length of time
and you can use the PC while it's charging.
When you start charging a completely empty battery, the start key
“WINDOWS” flashes until the screen wakes up and the charging
progress is shown.
If the battery is completely discharged, it may need to charge for up
to 20 minutes before the PC can be used.
The charging indicator may not be displayed in this time.
