8
2.6.1 Record Time
Enter here the correct date and time.
Press VOL+ button and the year- number will start flashing.
Change the year number by Press “F.FWD” or “F.REV” button
Press again VOL+ button and the months will start flashing flashing….
When date and time are correct, press menu button to confirm.
2.6.2 Backlight
Adjust the backlight intensity between 0 and 30,
by pressing “F.FWD” or “F.REV” button
Press “Menu” Button to confirm
2.6.3 Language
Change the language by pressing “F.FWD” or “F.REV” button
Press Menu button to confirm.
2.6.4 Power off
- Off time
With this function the device will automatically shut down after a preset time. (0-60sec), when no
button is touched and music is not playing.
If time is set at 0 seconds, the function is cancelled.
- Sleeping mode
With this function the device will always shut down after a preset time (0-120 min).
If time is set at 0, the function is cancelled.
When the device is powered off, sleeping mode is set at 0.
2.6.5 Replay
Manual replay or auto replay
2.6.6 Contrast
Change contrast by pressing “F.FWD” or “F.REV” button
Press “Menu” button to confirm.
2.6.8 Memory info
Gives a percentage of the used memory compared to the total memory size
.
2.6.9 Firmware version
Info about software version
2.7 USB disk use
The unit functions as a standard USB disk with most operating systems.
- Windows98 (driver needed)
- Above Windows 2000 (no need to install driver)
When connected with PC (battery not needed), the device can be
in 3 different modes
