MPM MWP-19, Руководство пользователя, Страница: 12 / 28

12
EN
4.
You can turn the fan head oscillation on with the “SWING” button (5d). When the oscillation
is on, the “SW” indicator light (5i) is on. Press “SWING” (5d) again to turn off the oscillation.
5.
Operate the “MODE” button (5e) to select the fan mode. The current fan mode is shown by its
indicator light (5h) being on. You can select from three fan modes:
- NOR: normal; the set fan speed is constant
- NAT: natural; the fan speed varies to simulate a natural air draught
- SLP: sleep; a silent fan mode with reduced and variable fan speed
6.
You can set the time to automatically turn off the fan with the “TIMER” button (5c). The se-
lected off time is shown by its indicator light (5f) being on. The off time is adjustable from 0.5
to 7.5 hours in 0.5-hour increments. The off time shown by the indicator lights which are on
is aggregated.
7.
To change the angle of the propeller, and thus the angle of the air stream, simply tilt the fan
head by holding the controls cover with the second hand to prevent the fan from overtur-
ning (fig.1).
8.
The head height can also be adjusted by loosening the head he-
ight adjustment nut (7), proper positioning of the head and tigh-
tening the nut.
9.
If you want to turn off the fan, press the “OFF” button (5a) and
unplug the fan from the mains.
10.
All of the above commands can be operated with the remote con-
trol (17) which features the buttons identical in function to the re-
spective buttons on the control panel (5).
CLEANING AND MAINTENANCE
WARNING! Do not immerse the appliance, its cord and plug in water or any other liquids
1.
Before cleaning the appliance, unplug it from the power outlet.
2.
The motor cover, controls cover, stand and cross of the fan, may be cleaned with a damp cloth
and a mild detergent, then wipe dry.
3.
The mesh guards may be occasionally wiped with a brush to remove dust
from the holes. After the propeller is unmounted, wipe it with a damp cloth
with a detergent.
4.
The remote control requires two 1.5 V AAA batteries to work. Access the
batteries by opening the battery compartment on the bottom side of the
remote control (Fig. 2). Mind the correct polarity and fit when changing
the batteries. Do not mix different types of batteries and/or spent batteries
with new batteries.
CAUTION! Do not dispose of spent batteries with household waste. Dispose of spent
batteries at designated battery collection points or return them to the seller. Never throw
batteries into fire.
fig.1
fig.2