
35
GB
DEFROSTING IN FRESH FOOD STORAGE COMPARTMENT
It is automatically controlled by switching the temperature regulator on or off so that there
is no need of operation of defrosting. Water from defrosting will be drained into an drip tray
through a drain pipe at the back of the fridge automatically.
DEFROSTING IN FROZEN-FOOD STORAGE COMPARTMENT
Defrosting in freezer chamber is operated manually. Before defrosting, take the food out; take
the ice tray and drawers out or put them into the fresh food compartment temporarily, then
switch off the appliance and leave the door of the refrigerator open until ice and frost dissolve
thoroughly and accumulation at the bottom of the freezer chamber. Wipe off the water with
soft cloth. In the case of speeding up the process of defrosting, you may put a bowl of warm
water (about 50
°
C) into the freezer chamber, and scrape away the ice and rost with a defrost-
ing spatula. After doing so, be sure to set the knob of the temperature regulator to the original
position.It is not advisable to heat the freezer chamber directly with hot water or hair dryer
while defrosting to avoid deformation of the inner case.It is also not advisable to scrape off
ice and frost or separate food from the containers which have been congealed together with
the food with sharp tools or wooden bars, so as not to damage the inner casing or the surface
of the evaporator.
WARNING! Before defrosting,please switch off the appliance.
IMPORTANT! The fridge should be defrosted at least every one month. During the using process, if the door
was opened frequently or using the appliance in the extreme humidity, we advise the user to defrost every
two weeks.
PERIODS OF DISUSE
In the event of prolonged periods of disuse, clean thoroughly after emptying, disconnect the
appliance from the power supply and leave the door ajar to avoid the formation of unpleasant
odors.
CLEANING AND CARE
For hygienic reasons the appliance (including exterior and interior accessories) should be
cleaned at least every two months.
WARNING! To avoid electrical shock, the appliance must not be connected to the main power supply during
cleaning. Before cleaning, switch the appliance off and remove the plug from the main socket.
EXTERIOR CLEANING
To maintain good appearance of your appliance, you should clean it regularly.
Spray water onto a cleaning cloth instead of spraying directly on the surface of the appliance.
This helps ensure an even distribution of moisture to the surface.
Clean the doors, handles and cabinet surfaces with a mild detergent and then wipe dry with
a soft cloth.
Caution!
Don’t use sharp objects to clean with, as they are likely to scratch the surface.
Содержание MPM-116-CJI-17
Страница 39: ......