MPM MMU-04, Руководство пользователя

Страница: 13 / 28

USING THE TRIMMER
1.
Remove the head protective cover
❸
.
2.
Start the appliance using the switch
❼
. After switching on, the
blades of the trimming head start to operate. When the head
touches the surface, the sound of the trimmer changes. This is not
unusual.
3.
Operate the lint shaver by sweeping the cutting head screen in
contact with the fabric. Do not press the lint shaver against the
fabric. The lint shaver’s cutting head will cut off the lint and force
it into the lint bin
❶
. If you need to shave lint from gentle textiles,
use the protective cover
❸
with the cutting head
❷
. However, it
will reduce the cutting surface of the cutting head
❷
.
4.
The chamber
❶
must be regularly emptied. If the engine slows
down or stops completely, this could mean that the chamber for
trimming residues is full or replace the batteries.
5.
After you have finished using the appliance, turn it off using the
switch
❼
and place the head protective cover
❸
.
NOTE! The trimming blades are very sharp. To avoid injury, use caution when
removing the head and blades.
CLEANING AND MAINTENANCE
The trimmer does not require any special maintenance. Simply fol-
low the instructions for use below:
z
To ensure proper operation, the appliance should be kept clean.
z From time to time - depending on the degree of cleanliness of the
blade
❷
- it is advisable to clean it with the brush
❾
. To do this,
first unscrew the blade cover - trimming head
❷
, then clean the
blade
❷
thoroughly. When finished, carefully screw the blade
cover
❷
back in place.
z
Use cloth for cleaning the external surfaces of the appliance. Do not
immerse the appliance in water or any other liquids!
z
Empty the lint bin
❶
contents into a trash bin. Remove the lint bin
by grasping its both sides and pulling away until the locks let go. To
reinstall the lint bin, slide it into the handle towards the cutting head.
13
GB