MPM MKW-03M, Руководство пользователя

Страница: 11 / 28

11
GB
1.
Jug /max. capacity 500 m/ with stain-
less steel thermo insulated double
walls for optimum maintenance of
a proper temperature of milk
2.
Transparent lid
3.
Stable swivel base 360° with non-slip
feet
4.
Place for the attachments
5.
Handle
6.
Stirring mode indicator lamp
7.
Heating mode indicator lamp
8.
On/Off switch
9.
Whisk for heating milk
10.
Whisk for frothing milk
11.
Pin for fitting the whisk
12.
Maximum level mark indicating the
highest filling level depending on the
whisk used:
• Whisk for heating milk
9
– higher
max. level – 240 ml, min. level - 70ml
• Whisk for frothing milk (cold or hot
mode)
10
– lower max. level – 115 ml,
min. level - 70ml
BEFORE USE:
Unpack the appliance making sure every part is undamaged. Clean the inner surfaces of the
appliance with a mild detergent. The lid of the jug
2
and whisks
9
,
10
may be cleaned under
running water using a mild detergent. Carefully wipe the outer surfaces of the appliance with
a damp cloth.
USAGE:
FROTHING MILK WITHOUT HEATING – COLD MODE (MAX. 115 ML):
Fit the frothing whisk 10 on a specially designed pin 11 . Fill the jug 1 up to the lower MAX
level line. Hold the switch
8
for 2 seconds. The appliance will start and the indicator lamp
6
will light up. The cycle lasts about 100 seconds. After the cycle is finished, the appliance will
switch off and the indicator lamp
7
will continue to flash for a while.
FROTHING MILK WITH HEATING – HOT MODE (MAX. 115 ML):
Fit the frothing whisk 10 on a specially designed pin 11 . Fill the jug 1 up to the lower MAX lev-
el line. In case of milk with a higher fat content pour a somewhat smaller quantity. Overfilling
may cause an overflow during frothing. Press the switch
8 . Both indicator lamps 6 , 7 will
light up. The cycle lasts about 100 seconds. After the cycle is finished, the heating indicator
lamp
7 will continue to flash for a while 7 .