15
GB
USING ICE BOX COOLING PACKS
The cooling packs keep cool. The low temperature in the tank is used for cooling the water.
The output air temperature is lower. And that lowers the temperature in the room
a.
Add water to the tank at the quantity to reach mark 8 after placing the ICE BOXes inside
the tank.
b.
Put ice cubes in the tank.
c.
The unit is supplied with 2 ICE BOXes which can be used alternately, after filling with wa-
ter, if empty.
d.
Do not replace the water in the ICE BOXes if they are filled because the cooling pack may
lose its cooling properties.
CLEANING AND MAINTENANCE
CAUTION BEFORE CLEANING, SWITCH OFF THE UNIT AND UNPLUG THE POWER CABLE.
CAUTION DO NOT USE WATER AT TEMPERATURE EXCEEDING 45°C FOR WASHING.
1.
Cleaning the air filter’s cover
Disconnect the power supply plug, pull the air filter cover upwards, take it out and clean
using a neutral detergent and cloth. Then clean it with clear water and reinstall on the
cooler. Clean the filter’s cover at least once a month.
2.
Cleaning the air filter
Disconnect the power supply plug, remove the air filter’s cover and the remove the filter
from the unit. Wash the filter using mild detergent and a soft cloth. Reinstall the filter in the
unit. Clean the filter at least once a month.
CAUTION DEPENDING ON THE WEATHER CONDITIONS, FREQUENCY OF USE, ETC., IT MAY BE REQUIRED TO CLEAN
THE AIR FILTER MORE OFTEN, EVEN ONCE A WEEK.
3.
Water tank cleaning
Disconnect the power supply plug, drain 1/2 of the tank, remove the water filter and clean
using a soft brush. Wipe the inside of the tank with a soft cloth and a neutral detergent.
Periodically, remove calcium from the tank To do that, put calcium removing agent into the
tank and then repeatedly flush with clean water; use vinegar or citric acid with water as a
calcium remover.
CAUTION DEPENDING ON THE WEATHER CONDITIONS, FREQUENCY OF USE, ETC., IT MAY BE REQUIRED TO CLEAN
THE WATER TANK MORE OFTEN, EVEN ONCE A WEEK.
CAUTION TO PERFORM COMPLETE CLEANING OF THE TANK, UNSCREW COMPLETELY THE BOLT UNDER THE
BASE, REMOVE THE BOLT HOLDING THE WATER PUMP IN THE TANK.
4.
Cleaning the unit
Clean the air cooler with a soft cloth with a cleaning agent and then wipe it dry.