MPM MGO-20M, Руководство пользователя

Страница: 11 / 40

11
EN
APPLIANCE DESCRIPTION
1.
Red caution lamp (power supply)
2.
Green caution lamp (thermostat)
3.
Upper cover
4.
Clip
5.
Heating panel
PRIOR TO THE FIRST USE:
ATTENTION! Before cleaning the heating plates make sure the appliance is unplugged!
1.
Prior to the fi rst use of the roaster, thoroughly wash the heating panels of the waffl emaker
with the cloth moistened with warm water and thoroughly wipe with dry cloth thereafter.
2.
Stand the appliance on a fl at, stable and dry surface which is resistant to high temperatures.
NOTE! The working surfaces of the waffl emaker are heated up to extremely high temperatures! Touch the hold-
ers only!
USE OF THE WAFFLEMAKER
NOTE! When opening the cover, proceed carefully owing to hot damp from the area under the heating panels!
1.
Oil the heating plates (5) with butter, margarine or other fat.
2.
Insert the plug into the socket – red caution lamp (power supply) (1) and green caution lamp
(thermostat) (2) will go on. Close the cover of the appliance (3).
3.
Prepare the dough for waffl es.
4.
When the green indicator lamp (2) will go off , open the cover by pulling the latch (4) and
carefully pour the dough for waffl es on the heating panels. Gently close the cover and clamp
with clip (4). Make sure the amount of dough is correct. Too much dough may fl ow out of the
appliance caus ing impurities.
5.
When checking the condition of waffl es in course of their roasting, open the cover carefully
owing to hot damp escaping from the both sides of the roaster!
6.
Open the cover and remove roasted waffl es using wooden or plastic spatula.
1
4
5
3
2
MGO-20M_instrukcja_v07.indd 11 MGO-20M_instrukcja_v07.indd 11 04.04.2022 09:05:28 04.04.2022 09:05:28