10
GB
BEFORE USE
1.
The kettle should be placed upright of flat, stable and dry surfaces .
2. Prior to the first use, fill the kettle with water, bring to boil. It is recommended that you
fill, boil, and empty the kettle at least 2 times.
3 The kettle will turn off automatically after water boiling. However it may be turned off
by the user at any time by moving the “on/off” switch to the off position, if necessary.
4 After water has been boiled or the kettle has been switched off, wait several seconds
before switching it on again.
5 The empty kettle will be automatically turned off by its overheating protection system.
In such case the kettle should be allowed to cool for 15 minutes before its refilling.
HOW TO USE THE KETTLE
1.
Remove the kettle from its base before filling it with water.
2. Open the kettle’s cover pushing the (2) button, pour water to a desired level (however,
not less than 0,5 l and do not exceed the level of 1,7 l)
3. Pushing the button close the cover accurately
4. Switch the kettle by means of the switch. When the water comes to a boil the kettle will
turn off automatically.
Important note!
The kettle may be used with its base delivered in the scope of purchased
model. Do not ever open the kettle lid in course of water boiling. The kettle should be
regularly descaled in accordance with the instructions included below. Always unplug cord
of power base before cleaning and allow the jar to cool down. The interior illumination
function works when the kettle is switched on only
CLEANING AND MAINTENANCE
1.
Fill the jar with water mixed with vinegar or lemon juice (citric acid) or special descaling
agent available in the shops selling the household equipment
2. Let the mixture soak in the kettle for an hour and boil the water thereafter
3. Empty the kettle and rinse the inside thoroughly with cold
4. Repeat this action up to three times, if necessary
5. In order to eliminate the smell of vinegar, boil and remove water several times
6. Wipe the jar inside and outside with a cloth.
7. Failure to descale your kettle may result in its damage.
TECHNICAL DATA
Power supply: 1850-2200 W
Voltage: 220-240 V ~50/60 Hz
Attention!
MPM agd S.A. reserves its rights to modify the technical data.
MCZ-13 MODERATO_instrukcja.indd 10
2011-09-27 09:19:40
