MPM MBL-19, Руководство пользователя

Страница: 11 / 24

11
GB
ATTENTION! Before pouring out the content of the jug wait until the knife stops rotating!
NOTE! To mix some products, such as ice, use the PULSE function repeatedly. It is activated by turning the knob
to the left and keeping it there. Do not start the motor for more than 3 minutes, because it may become over­
heated. After these 3 minutes stop the appliance and wait until it cools down.
INSTRUCTIONS FOR USE
1.
Boiled vegetables and fruit should cool down before putting them into the blender jug.
2.
To avoid overloading or overheating switch to the highest speed when the appliance starts
slowing down.
3.
Heavy sauce, paste, mayonnaise or other substances of similar consistency may be removed
by twisting off the jug base and pouring the contents on plates or into storage containers.
4.
Fluid or semi-fluid substances, such as batter and light sauce, may be poured out over the
top, after the lid is removed.
5.
Blender is not designed for the following:
- grating potatoes
- whipping eggs or dairy products substitutes
- mincing raw meat
- whipping or kneading dough (danger of forming a ball of dough which may damage the
appliance)
- juicing vegetables and fruit.
6.
Every few seconds check the consistency of the mixed ingredients.
7.
Do not exceed the maximum permitted working time of the appliance given in the user
manual.
8.
If the motor stops, immediately finish mixing or reduce the amount of ingredients in the jug.
9.
To grind ice cubes add a small amount of water.
10.
Do not remove the jug from the housing when the appliance is in use.
11.
Do not insert any objects into the jug during mixing.
CLEANING AND MAINTENANCE
1.
Blender components are corrosion-proof and easy to clean.
2.
Each time before and after using, disassemble the appliance and wash its parts in warm wa-
ter with detergent, rinse and dry them thoroughly.
3.
They should not be used in washing machines.
4.
Periodically check all operating components of the appliance before using them. Do not use
the blender if the blades got stuck or rotate with difficulty. Turn them counter-clockwise to
check if they operate properly. Be careful no to get injured. The blades should rotate easily.
5.
Do not use the appliance if the jug gets damaged, leaks or has fractures of cracks. Otherwise
it may crack while in use.
6.
In order to clean the blender housing unplug the appliance and then wipe it with a damp
cloth. If water gets to the top of the appliance, it will go down and through the drain hole
under the housing.
7.
The motor does not require any additional maintenance. Do not clean the appliance using
harsh or abrasive cleaning agents, materials or steel wool, which may cause damage.