MPC netframe 1610, Быстрый старт

Страница: 31 / 72

N F 1 6 1 0 / 2 6 1 0 S Y S T E M B O A R D F E A T U R E S
NF1610/2610 System Board Jumpers
4 -25
. .
.
. .
Table 14: NF1610/2610 Configuration Jumper Options
. . . . . . . . . . . . . . . .
Jumper Block
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Description
A - RJ-45 Serial Port Config
Configures either a DSR or a DCD signal to the connector.
B - CMOS CLR
If these pins are jumpered, the CMOS settings are cleared. These pins should not
be jumpered for normal operation.
C - PSWD CLR
If these pins are jumpered, the password is cleared. These pins should not be jumpered
for normal operation.
D - RCVRY BOOT
If these pins are jumpered, the system will attempt BIOS recovery. These pins should
not be jumpered for normal operation.
E - BMC Boot Block Write Enable
If these pins are jumpered, BMC boot block is erasable and programmable at the next
reset. These pins should not be jumpered for normal operation.
MAS001426-02.book Page 25 Monday, May 19, 2003 2:45 PM