MPB SEP, Руководство пользователя

Страница: 13 / 48

USER MANUAL
S E M S
- 13 -
3.2. Placement
Before any operation, plug the plexiglass support with a
tripod through the appropriate ¼“ threaded hole. In order
to have a better isotropy response from the SEP, please
perform the placement as in Figure 3.2. Please remember
to stay away from metal objects that may cause
electromagnetic reflections that may affect the
measurement.
3.3. Fiber Optic Plug
Insert the optical fiber in its room on the back of the SEP,
as in Figure 5
SEP on a tripod
being careful to match the
optical fiber recognizable by the blue color with the color
of the corresponding connector. On the side of the PC,
the USB – RS232 converter must be installed with the
optical link, supplied with the kit.
In this case there is only one way to connect the optical
fiber
to the connector. For the installation of the converter
driver
3.4. Switch On/Off
To turn on the device, press the power button ON/OFF, shown in Figure 2
.
To turn it
off press the same button for around 4 seconds. Please remember that the SEP is not a
standalone device, so it has to be plugged to a PC for programming and for real-time
data visualization. To learn the software usage, please skip to Chapter 4.
Figure 5 SEP on a tripod