16
FM Wire Antenna
•
Extent this wire antenna to obtain better FM broadcasting.
17
AUX-IN Jack
•
Connect the unit to the external audio device.
•
Sound output
18
Speaker
SETTING THE CLOCK
1. With the unit in CLOCK mode, press and hold the CLK/MEM button for about 1 second, the time will begin to flash on
the LED display.
2. Press the
/HR button to adjust the hour.
3. Press the
/MIN button to adjust the minute.
4. When the correct time is selected, press the CLK/MEM button again to confirm.
SETTING THE ALARMS
1. With the unit in CLOCK mode, press the ALM1/VOL
+
or ALM2/VOL
−
button. The ALARM time will
begin to flash on the LED display.
2. Press the /HR button to adjust the alarm hour.
3. Press the /MIN button to adjust the alarm minute.
4. When the correct time is selected, press the ALM1/VOL
+
or ALM2/VOL
−
button to confirm.
5. Press the ALM1/VOL
+
or ALM2/VOL
−
button to select the ALARM sound mode - buzzer or currently
set radio station. The alarm buzzer or radio indicator will light up.
SNOOZE FUNCTION
1. Whenever the alarm (radio or buzzer) activates, it can be temporarily suspended for a short period of 9 minutes by
pressing the SNOOZE/SLEEP button once.
2. The buzzer or radio will then automatically activate again after the 9 minutes SNOOZE period has ended.
3. This procedure can be repeated for up to approximately one hour.
CONNECTING THE UNIT TO POWER
Plug AC power cord to the AC wall outlet. Before switching on the unit, make sure that the voltage of your electricity supply
is the same as that indicated on the rating plate.
BATTERY BACKUP
Insert two pieces UM-4 batteries into the battery compartment. Be sure to observe the proper polarity (the "+" and "-" signs)
as indicated inside the battery compartment.
In case of power failure or interrupted AC power, the current time and alarm time settings, the stored radio stations are
preserved in the memory of the unit by means of battery back-up function.
TURN OFF THE ALARM
When the Alarm activate, press the ALM OFF/SOURCE button to turn off the Alarm.
LISTENING TO THE AM/FM RADIO
1. Press the ALM OFF/SOURCE button to select the FM or AM mode.
2. Press the
/HR button or
/MIN button step by step to tune to the desired radio stations.
3. Press and hold the
/HR button or
/MIN buttons for approx. 1 second, it will start to search the
in the direction of the search.
next radio station
The search operation simply finds stations with strong signals. Stations with weak
reception can only be tuned in manually.
ANTENNA
For best reception, fully extend the FM wire antenna to receive FM stations. For AM reception, the unit has
turn the whole unit for best reception.
a built-in antenna,
-EN3-
