Installation
Instructions
t
1.877.708.1184
f
604.708.1185 www.mplighting.com
16 West 4th Avenue, Vancouver BC V5Y 1G3, Canada
Copyright
©
MP
Lighting.
All
technical
information
in
this
document
is
subject
to
change.
01-2013
• Read all instructions.
• WARNING: RISK OF FIRE OR ELECTRICAL SHOCK: Do not make
or alter any openings in the compartment of wiring or electrical
components during installation. Do not alter or add ballasts, or
any other electrical components.
• Installation and use of this fixture mounting assembly requires a
person familiar with the construction and operation of luminaire
electrical systems and the hazards involved, if not qualified, do
not attempt installation.
• Turn off power before installation.
• Do not over tighten screws.
• Do not spray water on fixture during cleaning. Avoid using
detergents with hand softeners, anti-bacterial agents, glass
cleaners or acrylic cleaning products.
• KEEP THESE INSTALLATION INSTRUCTIONS.
CAUTION
L740-L48
Copyright
©
MP
Lighting.
All
technical
information
in
this
document
is
subject
to
change.
11-2015
Tools
• Phillips screwdriver
not included
Maintenance
Use a soft cloth to remove any
fingerprints.
1
2
Align crossbar to electrical box and tighten
mounting screws.
3
Align cover plate to crossbar. Tighten
screws.
5 1/8
5/8
3 1/4
5 1/8
5/8
2 1/2
Remote Driver Option
Connect fixture wires directly to
low voltage box leads.
Connect primary to driver input wires
then fit into electrical box.
• For cast in concrete use
appropriate box rated for cast
in concrete. Consult local
electrical code.
Cover Plate
Gasket
Crossbar
Waterproof
Wire Nuts
For DC Driver
AC Input Voltage:
100~240V, 50/60Hz
DC Output Current:
3W - 350mA Constant Current
6W - 700 mA Constant Current
Parts
Qty.
• LED unit w/ gasket
• Cross countersunk screws
• Set Screw
• Universal crossbar
• LED driver
• Waterproof wire nuts
1
2
1
1
1
2
Standard 4”
Waterproof Box
Set Screw
•
Allen Key M3
Non Dimmable Driver
3W - 350 mA
6W - 700 mA
Box supplied by others
included
