30
31
IX. APPENDIX A
FASTENER TORQUE SPECIFICATIONS
• Correct tightening torque of threaded fasteners is very important
to your safety. Always tighten fasteners to the correct torque. In case
of a conflict between the instructions in this manual and information
provided by a component manufacturer, consult with MOZIE Bicycles
or a qualified bicycle shop for clarification. Bolts that are too tight can
stretch and deform. Bolts that are too loose can move and fatigue.
Either mistake can lead to a sudden failure of the bolt.
• Always use a correctly calibrated torque wrench to tighten critical
fasteners on your bicycle. Carefully follow the torque wrench manufac-
turer’s instructions on the correct way to set and use the torque wrench
for accurate results.
• Always use the correct size Allen socket, open-end or box-end wrench.
Avoid use of a crescent wrench or vice grips as they can damage com-
ponents.
FASTENER RECOMMENDED TORQUE:
Stem to attach the handlebar: 200-300kgf/cm
2
Stem to attach the fork: 200-300kgf/cm
2
Pedal: 350kgf/cm
2
Seat post clamp on seat tube: 110kgf/cm
2
B. If your bicycle sustains an impact:
First, check yourself for injuries, and take care of them as best you can.
Seek medical help if necessary.
Next, check your bike for damage.
After any crash, take your bike to a qualified bicycle shop for a thorough
check.
WARNING: A crash or other impact can put extraordinary stress on
bicycle components, causing them to fatigue prematurely. Components suffer-
ing from stress fatigue can fail suddenly and catastrophically, causing loss of
control, serious injury or death.
VIII. SERVICE
Содержание Carolina
Страница 1: ......
