Moza iFocus M, Руководство пользователя, Страница: 7 / 16

5
高级
通用
＞
＞
camera
gimbal
advanced
general
autotune
balance chk
focus
inception
希区柯克
F1
dolly zoom
[on]
清除AB点
switch
set A
set B
clear AB
[on]
设定B点
ok
设定A点
清除AB点
set A
set B
clear AB
switch
高级
通用
＞
＞
camera
gimbal
advanced
general
autotune
balance chk
focus
inception
希区柯克
F1
dolly zoom
dir
dir
time/s
start
b. Device Calibration:
1. Enter the menu of Air 2, select advanced>focus>F1/F2 (can control both
motors simultaneously) > [on]. Control the motor to move the camera lens
to the start point by adjusting the stabilizer handwheel. Then select “set A”
and right click to confirm the start point. Control the motor to move the
camera lens to the end point by adjusting the stabilizer handwheel. Then
select “set B” and right click to confirm end point (both iFocus M need to
be calibrated).
2. Enter Dolly Zoom mode, select advanced>focus>dolly zoom> F1dir (A→B or
B→A), and also set the movement for follow focus motor F2 (A→B or B→A).
8.Dolly Zoom (requires two motors)
a. Precondition:
Device: lens + AirCross 2/Air 2 + Two iFocus M motors.
Installation: Install camera and iFocus M motors and adjust the balance, the
first iFocus M connect with lens focus ring, second one connect with lens
zoom ring (Air 2 cable is sold separately).