7
Note:
•
When installing the camera, if the right side of the camera interferes with tilt arm
caused the installation to fail, loosen the knob of the quick-release baseplate and
move it to the left until the camera can be installed successfully.
•
After the camera is installed, move the quick release baseplate to the right and
make sure the camera’s right side is aligned with the tilt arm to achieve the beset
stability.
Balance Adjustment
1. Balancing the tilt axis vertical.
•
Rotate the camera so that the lens is pointing upward.
•
Unlock the tilt axis and loosen the knob, slightly adjust the position of the tilt
adjustment slider.
•
The balancing is completed when the camera is steady while pointing upward,
lock the tilt axis.
2. Balancing the tilt axis horizontal
•
Rotate the camera so that lens is pointing forward.
•
Unlock the quick release plate, slightly adjust the position of the plate.
•
The balancing is completed when the camera is steady while pointing forward,
lock the quick release plate.
