Moyer Diebel 383HT, Инструкция по установке, эксплуатации и обслуживанию

Страница: 20 / 32

Operation
Control Panel Description
A
B C D E F
G
Fig. 17
H
A - ON-OFF/Drain power switch turns power on and off. It initiates the automatic fill cycle when
turned on and the automatic drain cycle when turned off.
B- WASH INDICATOR light illuminates whenever the temperature display indicates the water
temperature in the wash tank.
C- RINSE INDICATOR light illuminates whenever the temperature display indicates the final rinse
water temperature.
D- TEMPERATURE DISPLAY indicates water temperature and displays operation codes for the
operator. The minimum wash water temperature is 150°F/66°C. The minimum/maximum final
rinse temperature is 180-195°F/ 82-91°C.
E - IN CYCLE INDICATOR light illuminates during the initial fill, the automatic timed cycle, and during
the automatic drain cycle.
F- WAIT INDICATOR light illuminates during the initial fill and as the booster heats to the minimum
180°F/82°C. The indicator light goes out when 180°F/82°C is achieved.
G- DETERGENT PRIME SWITCH when pressed, runs the detergent dispensing pump to prime the
pick-up hose during initial set-up and whenever the detergent supply container is changed.
H- START PUSH BUTTON Pressing the START button initiates an automatic timed cycle and illuminates
the IN CYCLE light.
I
- PRESSURE GAUGE indicates the final rinse water flowing pressure during the initial fill and
the automatic final rinse cycle. The proper pressure reading is 20-22 PSI. The pressure gauge
is located on the left side of the lower front panel.
10
0
30
20
PSI
60
50
40
PRESSURE
20-22 PSI
I
Fig. 18
12