Moxie MXRTG03-812-CB, Руководство пользователя

Страница: 14 / 28

13
When attaching the springs, do not place your hands, arms, legs or any other
body part close to the connector points (i.e. joints connecting the steel tubes).
The connector points can become pinch points as the trampoline springs tighten
up. Wear heavy duty working gloves to protect your hands from injuries during
installation by the springs and protective goggles to avoid injuries to the eyes.
Be steady when installing the springs as it can rebound and fly off if you
inadvertently let go when not hooked properly. Make sure no children are playing
nearby when installing the trampoline.
Step 5 –Spring Assembly
5A.
To install the springs, hook one end of
the Spring (part 15) into the triangle-ring
on the Mat (part 22), then pull the other end
with the Spring Pull Tool (part 32) underhand and
latch it into the corresponding hole on the frame.
Tap on the spring with the handle of the Spring
Loading Tool to make sure it is securely latched.
5B. There are a total of 64 springs, For even distribution of spring tension and ease
of assembly, the springs must always be installed on opposite sides of the mat in
an alternating manner. Please follow the diagram locations in numerical order: 1,
then 2, followed by 3 and 4 as shown below. Hint: The number of triangle-rings sewn
onto the Mat is equal to the number of holes on the frame. If you notice that you have
missed a hole or triangle-ring, remove and reinstall the springs in the same order.