W315A/325A
Hardware Introduction
2-4
Reset Button
Hold in the reset button for 5 seconds to load the factory default configuration. After loading the factory
defaults, the system will reboot automatically. We recommend that you use this function only if the software is
not working properly. To reset the Linux system software, always use the software reboot command (“reboot”)
to protect the integrity of your data.
The reset button is NOT designed to hard reboot the embedded computer.
ATTENTION
Restoring default settings preserves your data
Resetting the embedded computer to factory defaults will format the user directory and erase the contents in
/etc
and
/home
. The reset button only loads a configuration file. All files in the
/etc
directory will revert to
their factory defaults.
Note that if there is a problem with the
/etc
directory, the embedded computer may be unable to restore the
factory default settings.
Real Time Clock
The embedded computer’s real-time clock is powered by a lithium battery. We strongly recommend that you do
NOT replace the lithium battery on your own. If the battery needs to be changed, contact the Moxa RMA service
team.
WARNING
There is a risk of explosion if the wrong type of battery is used. To avoid this potential danger, always use the
correct type of battery. Contact the Moxa RMA service team if you need to replace your battery. Dispose of
used batteries according to the instructions on the battery.
