- 12 -
You should also pay attention to the following:
•
Use separate paths to route wiring for power and devices. If power
wiring and device wiring paths must cross, make sure the wires are
perpendicular at the intersection point.
•
You can use the type of signal transmitted through a wire to
determine which wires should be kept separate. The rule of thumb is
that wiring that shares similar electrical characteristics can be
bundled together.
•
Keep input wiring and output wiring separated.
•
We strongly advise labeling wiring to all devices in the system.
Dimensions (mm)
Front View
Bottom View
VP-FD1
(front decorative plate)
VPort P06HC’s L-type mounting
kit
Specifications
Camera
Sensor
1/2.7” HD progressive scan CMOS
Lens
3.6 mm fixed focal length
Angle of view
3.6 mm, F1.6: Diagonal 125°, Horizontal 104°,
Vertical 54°
Illumination
(Low light sensitivity)
0.2 Lux at F=1.2, color
Synchronization
Internal
White Balance
ATW/AWB (range: 3200 to 10000°K)
Electronic Shutter
Auto, 1/30 to 1/25000 sec.