VPort 2310 User’s Manual
System Configuration
4-11
NOTE
The default video quality control setting is
Fixed bit rate
at 384 Kbps. At this bandwidth, the
image quality is good under most conditions if the FPS is near 30 and the video size is normal.
But the image quality, FPS, and bandwidth are influenced significantly by the network
throughput, system network bandwidth management, applications VPort runs (such as VMD),
how complicated the image is, and the performance of your PC or notebook at displaying
images. The administrator should take into consideration all of these variations when designing
the video over IP system, and when specifying the requirements for the video system.
Enable Motion Detection
Checkmark the
□
Enable Motion Detection
box to enable the VMD (Video Motion Detection)
function. To set up VMD, refer to the
Configuration/Motion Detection
page.
Flip and Mirror
Flip
and
Mirror
are used to change what the image looks like on VPort’s homepage. Checkmark
the
Flip
box to flip the image about a vertical axis, and checkmark the
Mirror
box to flip the
image about a horizontal axis.
Image Setting
To adjust image settings for the best visual quality, click on Image Settings to open a motion
picture window. Four fields need to be configured:
Brightness
,
Contrast
,
Hue
, and
Saturation
.
Each field has eleven levels, ranging from -5 to +5. Click on
preview
at any time to see if the
settings are appropriate before clicking on
Save
. If the adjustment is not satisfactory, click on
restore
to restore the original settings. When finished, click on
Close
to close the window. If the
configuration is changed without saving, the settings will be deleted the next time the system starts
up.
Save the settings
Click on the
Save
button to save the settings to the VPort. The message shown below will pop up,
informing you that
If you change the modulation, the server will restart and you need to
reconnect [to] the server by reloading the web page.
This means that the VPort will only restart
its system if you change the camera’s modulation manually. In addition, if are not using a fixed IP
address, or you find that the previous IP address no longer connects to the VPort, you will need to
