- 7 -
TN-5818A Series
Panel/Wall Mounting
STEP 1:
Mounting the TN-5816A/5818A to a wall requires 4 screws. Use the
ToughNet switch as a guide to mark the correct positions of the 4 screws.
STEP 2:
Use the 4 screws in the panel mounting kit. If you
would like to use your own screws, make sure the
screw head is between 6.0 mm and 7.0 mm in
diameter and the shaft is less than 4.0 mm in
diameter, as shown at the right.
Do not screw the screws in all the way—leave a space of about 2 mm to
allow room for sliding the ToughNet switch between the wall and the
screws.
