SMG-6100 Hardware
Hardware Installation
Connecting USB Devices
The SMG-6100 has two USB 2.0 ports on the rear panel. All of the ports are UHCI, Rev 2.0 compliant and
support Plug & Play and hot swapping. These ports can be used to connect USB devices, such as a keyboard,
mouse, USB flash disk, and USB CD-ROM.
USB 2.0 Host x 2
LAN Ports
The SMG-6100 has 4 10/100 Mbps LAN ports. When the cable is properly connected, the LEDs on the RJ45
connectors will glow to indicate a proper connection.
10/100 Mbps LAN x 4
1
1
8
8
Pin No. Signal Definition
1 TX+
2 TX-
3 RX+
4 ---
5 ---
6 RX-
7 ---
8 ---
LED
Color
Description
Green
100 Mbps of Ethernet Port is active.
Ethernet Port 100 Mbps
Off No
activity.
Orange
10 Mbps of Ethernet Port is active.
Ethernet Port 10 Mbps
Off No
activity.
The default IP addresses and netmasks of the LAN ports are as follows:
Default IP Address
Netmask
LAN 1
192.168.127.253
255.255.255.0
LAN 2
192.168.12
6
.254
255.255.255.0
LAN 3
192.168.12
5
.254
255.255.255.0
LAN 4
192.168.12
4
.254
255.255.255.0
2-7
