Moxa Technologies Smartio C104H/PCI Series, Руководство пользователя

Страница: 55 / 64

Smartio
C104H/PCI Series User’s Manual
6-1
6 6
6
T Trro ou ub blle es sh ho oo ottiin ng g
Common
Smartio
C104H/PCI Series errors and possible corresponding solutions
are listed below. If the problem still cannot be solved by following solutions given,
contact dealers or Moxa for help or use the
Problem Report Form at the end of
this manual to report problems to your dealer at once for faster technical support.
General Troubleshooting
1. The MOXA PCI board cannot be detected by the MOXA driver while
installing the driver.
Hardware causes and solutions:
A. The board is not installed or missing (absent). Please install it.
B. The board is not properly plugged in the system. If that is the case, re-
plug the board in a 32-bit PCI slot this time. Sometimes the slot for
plugging the board is malfunctioned. In this case, try other slots until you
find a good one.
C. The motherboard does not have an available IRQ for the C104H/PCI
Series board. Please enter BIOS and make sure there are available IRQ in
PCI/PnP settings.
2. The MOXA board and driver are activated but cannot transfer
(transmitting/receiving) data.
Hardware Causes and Solutions:
A. Check if cable wiring is connected correctly. Please refer to the
“
Connection Cable and Cable Wiring ” chapter for correct cable
connection.
B. The cable or the board are probably defective. Please try other ports,
cables or boards to verify it. Or use
PPCCoom mm m
Diagnostic utility testing