OnCell G2111/G2151I Series
Getting Started
2-6
Connecting the Antenna
ATTENTION
Make sure the transmitter antenna is placed so that it is at least 20 cm (8 inches) away from any people or
users. The modem is not designed for applications where users will be in close proximity for prolonged periods.
Turn the unit off for the following situations:
•
When in an aircraft
•
When around gasoline or diesel-fuel pumps and before filling your vehicle with fuel
•
When in hospitals and any other place where medical equipment may be in use
Respect any restrictions on the use of radio equipment, especially around fuel depots, chemical plants, and
blasting operations.
The OnCell G2111/G2151I Series modem may present a hazard for inadequately protected personal medical
devices such as hearing aids and pacemakers. Consult the manufacturer of the medical device to determine if
it is adequately protected.
The OnCell G2111/G2151I Series modem may cause interference for inadequately protected electronic
equipment. Observe any warning signs and manufacturers’ recommendations.
All OnCell G2111/G2151I Series modems are shipped with a 0 dBi antenna with SMA connector and magnetic
mount. The 3-meter patch cord is ideal for installing the modem in places such as a metal cabinet or a vending
machine.
Connecting to a Power Source
The power connector is a 3-pin terminal block. It can connect to different types of field power sources that
support 12 to 48 VDC. When power is connected, the “PWR” LED will light up. It will glow a steady green when
the system is ready.
A terminal block adaptor with power jack connector is provided to connect to AC power instead of DC power.
Compatible AC power adaptors are listed on the Moxa website,
ATTENTION
Always install the antenna first and then connect power. Do not connect power if the antenna has not been
installed! Doing so may damage the unit.
www.ipc2u.ru
www.moxa.pro
