OnCell G2100 SeriesI User’s Manual
OnCell Configurator
3-37
3.
Click
Set Defaults
on the right side of the window.
4.
Select the appropriate COM port and communication parameters for connecting to the
modem and click
OK
to proceed.
ATTENTION
If you are not sure which communication parameters you should use, please select the
Auto
Detect Serial Settings
option and follow the onscreen instructions. The procedure may take few
minutes to complete. When using the
Auto Detect Serial Settings
function, if the
GSM
or the
GPRS
LED is
ON
or blinking, you must remove the SIM card, or use the escape command (
+++
)
on the terminal to disconnect the current connection.
The default parameters are 115200, 8n1, and RTS/CTS flow control.
