NPort IA5150/5250 Series User’s Manual
Web Console Configuration
5-6
ATTENTION
If you disable both the “Web console” and “Telnet console,” you can still use NPort
Administrator to configure NPort IA5150/5250 device servers either locally or remotely over the
network. Refer to Chapter 6 for more details.
Reset button protect
Setting
Factory Default
Necessity
No or Yes
No
Required
Options are
No
and
Yes
, with default =
No
.
NOTE:
Select the
Yes
option to allow limited use of the Reset Button. In this case, the Reset
Button can be used for only 60 seconds. I.e., 60 sec. after booting up, the Reset Button will be
disabled automatically.
Network Settings
You must assign a valid IP address to NPort IA5150/5250 before it will work in your network
environment. Your network system administrator should provide you with an IP address and
related settings for your network. The IP address must be unique within the network (otherwise,
NPort IA5150/5250 will not have a valid connection to the network). First time users can refer to
Chapter 3, “Initial IP Address Configuration,” for more information.
You can choose from four possible “IP configuration” modes—
Static, DHCP, DHCP/BOOTP,
and BOOTP
—located under the web console screen’s IP configuration drop-down box.
