– 4 –
– 5 –
– 6 –
www.moxa.com/support
The Americas: +1-714-528-6777 (toll-free: 1-888-669-2872)
Europe: +49-89-3 70 03 99-0
Asia-Pacific: +886-2-8919-1230
China: +86-21-5258-9955 (toll-free: 800-820-5036)
2010 Moxa Inc., All Rights Reserved
LCM Display Panel
The NPort 6600 display panel will show the model name, server
name, and IP address when powered up
N P 6 6 1 0 _ 6 6 1 0 2
1 9 2 .
1 6 8 .
1 2 7 .
2 5 4
Operating the LCM Panel
There are four push buttons on the NPort 6600’s top panel for
operating the server’s LCM panel. The function of each button is
described below:
Button Action
MENU Activates the main menu, or returns to a lower level.
∧
Scrolls up through a list of items shown on the LCM panel’s
second line.
∨
Scrolls down through a list of items shown on the LCM
panel’s second line.
SEL Selects the option listed on the LCM panel’s second line.
Detailed LCM panel operating instructions can be found on the
Document and Software CD in the “NPort 6600 Series User’s
Manual.”
Note: LCM display panel and push buttons only for standard
temprature model
4.
Hardware Installation Procedure
STEP 1
: Connect the NPort 6600 device server to a suitable power
source.
AC models: Connect the 100 to 240 VAC power cord to the NPort
6600’s power input.
DC models
STEP 2
: Connect the NPort 6600 series to a network. Use a
standard straight-through Ethernet cable to connect to a hub or
switch. Use a cross-over Ethernet cable when connecting to your
computer’s Ethernet port (e.g., when setting up or testing the
NPort 6600 server).
: Connect the terminal block to a battery.
STEP 3
: Connect the NPort 6600’s serial ports to your serial
devices.
5.
Software Installation Information
NPort Search Utility
To install the NPort Search Utility, insert the NPort Document and
Software CD into your computer’s CD-ROM drive. When the NPort
Installation CD window opens, click on the Installation button, and
then follow the instructions on the screen. To view detailed
information about the NPort Search Utility, refer to the pdf version
of the “NPort 6600 Series User’s Manual,” which is located in the
document directory of the CD.
PComm Lite and Console Port (19200, 8, None, 1)
MOXA’s PComm Lite software utility is also included in the
Document and Software CD of the CD-ROM. PComm Lite is often
used to connect to the NPort 6600 through its console port to
configure the IP address for the first time. Use the following serial
console parameters when connecting through the console port:
19200, 8, None, 1.
6.
Pin Assignments and Cable Wiring
Pin
Pin Assignments (NPort 6610/6650)
RS-232
RS-422,
4-wire RS -485
2-wire RS-485
1
DSR
---
---
2
RTS
TxD+
---
3
GND
GND
GND
4
TxD
TxD-
---
5
RxD
RxD+
Data+
6
DCD
RxD-
Data-
7
CTS
---
---
8
DTR
---
---
NPort6610/6650
Pin Mapping for RS-232 Cables (NPort 6610/6650)
Serial Device
RJ45
DB9(M) DB9(F) DB25(M) DB25(F)
DSR
1
6
4
6
20
DTR
RTS
2
7
8
4
5
CTS
GND
3
5
5
7
7
GND
TxD
4
3
2
2
3
RxD
RxD
5
2
3
3
2
TxD
DCD
6
1
1
8
8
DCD
CTS
7
8
7
5
4
RTS
DTR
8
4
6
20
6
DSR
NPort 6650
Pin Mapping for RS-422/4-wire RS-485 Cables (NPort
6650)
Serial Device
RJ45
DB9(M) DB9(F) DB25(M) DB25(F)
TxD+
2
7
8
4
5
RxD+
GND
3
5
5
7
7
GND
TxD-
4
3
2
2
3
RxD-
RxD+
5
2
3
3
2
TxD+
RxD-
6
1
1
8
8
TxD-
Pin Mapping for 2-wire RS-485 Cables (NPort 6650)
NPort 6650
Serial Device
RJ45
DB9(M) DB9(F) DB25(M) DB25(F)
GND
3
5
5
7
7
GND
Data+
5
2
3
3
2
Data+
Data-
6
1
1
8
8
Data-
7.
Specifications
LAN
Ethernet Ports: 10/100 Mbps (RJ45)
Protection:
Built-in 1.5 KV magnetic isolation
Serial Interface
NPort 6610:
NPort 6650:
8, 16, or 32 RS-232 ports (8-pin RJ45)
8, 16, or 32 RS-232/422/485 ports (8-pin RJ45)
Signals:
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD,
GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485(2W): Data+, Data-, GND
RS-485(4W): Tx+, Tx-, Rx+, Rx-, GND
Serial Line
Protection:
15 KV ESD for all signals
RS-485 Data
Direction:
ADDC™ (Automatic Data Direction Control)
Serial Communication Parameters
Parity:
None, Even, Odd, Space, Mark
Data bits:
5, 6, 7, 8
Stop bit(s):
1, 1.5, 2
Flow control:
RTS/CTS, XON/XOFF, DTR/DSR
Speed:
50 bps to 921.6 Kbps
Console port: RS-232 console × 1
Memory Expansion Slot
Slot Type:
SD socket (supports up to 2 GB)
Power Requirements
Power input:
100 to 240 VAC, 47 to 63 Hz,
±48 VDC (20 to 72 VDC, -20 to -72 VDC)
Alarm Contact: Relay output with current carrying capacity of 1A
@ 24 VDC
Mechanical Specifications
Material:
SECC sheet metal (1 mm)
Dimensions:
(W×D×H)
480×44×195 mm (including ears)
440×44×195 mm (without ears)
Environment
Operating
Temp.:
0-55°C (32 to 131°F), 5 to 95% RH
Wide Temp.:
-40 to 75°C (-40 to 167°F)
Storage Temp.: -40 to 75°C (-40 to 167°F)
Regulatory Approvals
EMC:
FCC Class A, CE Class A
Safety:
UL, CUL, EN 60950-1
