NPort 5200 Series User’s Manual
Configuring NPort Administrator
6-7
ATTENTION
Before modifying NPort 5200’s configuration, use
Broadcast Search
to locate all NPort 5200s
connected to the LAN, or use
Specify by IP Address
to locate a particular NPort 5200.
Unlock Password Protection
If the NPort 5200 is password protected (indicated by “Lock” for Status), you will receive the
following error, and you will not be able to use the right click method to open the configuration
page.
In this case, proceed as follows to “Unlock” the device server.
1.
Select the NPort 5200 with “Lock” status, click the right mouse button, and then select
Unlock
.
2.
Input the password and then click on
OK
.
3.
the Administrator will display an “Unlock ok” message.
4.
The “Lock” status will change to “Unlock,” and the Administrator utility will keep this NPort
5200 in the Unlock status throughout this Administrator session.
