- 2 -
Overview
The NPort 5200 compact palm-sized device servers are used to control
RS-232 (NPort 5210/5230/5210-T/5230-T) or RS-422/485 (NPort
5230/5232/5232I/5230-T/5232-T/5232I-T) serial devices over a
TCP/IP-based Ethernet.
NOTE “-T” indicates an extended operating temperature model.
Package Checklist
Before installing your NPort 5200, verify that the package contains the
following items:
•
1 NPort 5200 2-port Serial Device Server
•
Documentation & Software CD
•
NPort 5200 Series Quick Installation Guide
Optional Accessories
•
DK-35A: DIN-Rail Mounting Kit (35 mm)
•
CBL-RJ45M9-150: RJ45 (8-pin) to DB9 (M) cable, 150 cm
•
CBL-RJ45F9-150: RJ45 (8-pin) to DB9 (F) cable, 150 cm
•
CBL-RJ45M25-150: RJ45 (8-pin) to DB25 (M) cable, 150 cm
•
CBL-RJ45F25-150: RJ45 (8-pin) to DB25 (F) cable, 150 cm
•
DIN-Rail Power Supply and Adapter
Note: Notify your sales representative if any of the above items are
missing or damaged.
Hardware Introduction
The NPort 5200 device servers are used to control RS-232/422/485
devices. The NPort 5210/5210-T has two 8-pin RJ45 ports, both for the
RS-232 interface. The NPort 5230/5230-T has one 10-pin terminal block,
with 5 pins used for one RS-232 port, and 5 pins used for one RS-422/485
port. The NPort 5232/5232I/5232-T/5232I-T have one 10-pin terminal
block, with 5 pins used for one RS-422/485 port, and 5 pins used for
another RS-422/485 port.
