MGate 5134 Series User Manual
14
Parameter
Value
Description
FIFO
Enable, Disable
The internal buffer of UART. Disabling FIFO can reduce
the latency time when receiving data from serial
communications, but this will also slow down the
throughput.
Parameter
Value
Description
Flow Control
(only for RS-
232 mode)
None,
RTS/CTS,
RTS Toggle
The RTS Toggle will turn off the RTS signal when there is
no data to be sent. If there is data to be sent, the RTS
toggle will turn on the RTS signal before a data
transmission and off on completion of the transmission.
RTS on delay
0 to 100 ms
Only available for the RS-232 mode to implement the
RTS Toggle function.
RTS off delay
0 to 100 ms
Only available for the RS-232 mode to implement the
RTS Toggle function.
RTS Toggle
The RTS Toggle function is available only in the
RS-232
mode. This flow-control mechanism is achieved by
toggling the RTS pin in the transmission direction through a software setting. Data is transmitted after the
RTS pin is toggled ON for the specified time interval. After the data transmission is finished, the RTS pin will
toggle OFF for the specified time interval automatically.
System Settings—SNMP Settings
System Settings—SNMP Settings—SNMP Agent