– 1 –
– 2 –
– 3 –
P/N: 1802002190010
MD-219 Series
Quick Installation Guide
First Edition, September 2014
Overview
The MD-219 is the 19-inch version of our marine display series.
Designed for durably reliable service as an ECDIS display
component, the MD-219 has a 5:4 aspect ratio, alongside full
range dimming and optional optical bonding, making it well-suited
not only for ECDIS applications, but for a variety of other bridge
applications as well.
The MD-219 features both AC and DC power inputs, and may be
conveniently installed on any bridge, without the need for extra
hardware.
Moxa’s marine displays are compliant with the most important
industrial marine standards, including IEC 60945, DNV, and
IACS-E10, giving strong assurance of their suitability for marine
applications.
Package Checklist
Before installing the MD-219 Series, verify that the package
contains the following items:
•
MD-219 display
•
VGA cable
•
DVI-D cable
•
2-pin terminal block x 1
•
5-pin terminal block x 2
•
Documentation and software CD
•
Quick installation guide (printed)
•
Warranty card
NOTE: Please notify your sales representative if any of the above
items are missing or damaged.
Hardware Installation
Appearance
SavvyTouch Display Control Buttons
The following table describes the SavvyTouch display controls on
the front surface of the MD-219. These intelligent controls light up
in response to a simple wave of the hand over the area of the
screen where they are located.
Name
Display
Color
Control Function / Color Legend
Menu/
Power
Green
Display is powered on and
functioning normally. Touch the
button to show the OSD settings
menu
Red
No input signal detected. Display
standby
Off
Power is down and the display is off
Brightness White
+: To increase brightness of panel
-: To decrease brightness of panel
Info
Off
AC/DC power functioning normally
Red
AC/DC power error
Display
mode
White
Switch between DAY/DUSK/NIGHT
brightness modes
Off
Panel brightness out of default range
Installing the MD-219
Desktop
The MD-219 comes with optional brackets that allow you to install
the display on a horizontal surface, such as a desktop. Three round
screws are required for each bracket. See the figure at the top of
the next page for detailed screw specifications, including the
required torque values.
Place your MD-219 display on a clean, flat, well-ventilated desktop.
To protect the display from overheating, leave some ventilation
space between the MD-219 and other equipment. Do not place
equipment or objects on the panel, as this might damage internal
components.
