- 4 -
Panel Mounting
The MD-200 series comes with 14 optional clamp mounts for installation
on a wall (where space has been cut out to accommodate the rest of the
hardware) or into computing stations where a flush mount is desired.
The maximum thickness of the surface to which the computer can
be clamped is 11 mm.
For a secure mounting, all 14 clamps must be
used.
The clamp arms are fastened into slots on all four sides of the MD-200
series. Use the short M4 SUS screws to fasten the clamp arms to the
MD-200 series mounting slots, as shown in the following magnified inset
in the diagram. Next, use the clamps to fasten the MD-200 series to its
mounting point; please note the torque value as shown in the figure.
