- 3 -
DIN Rail Mounting (ISD-1200-T Series only)
The aluminum DIN rail attachment plate should be fixed to the back panel
of the ISD when you take it out of the box. If you need to reattach the DIN
rail attachment plate to the ISD, make sure the stiff metal spring is
situated towards the top, as shown in the figures below.
STEP 1:
Insert the top of the DIN rail into
the slot just below the stiff metal
spring.
STEP 2:
The DIN rail attachment unit will
snap into place as shown below.
To remove the ISD from the DIN rail, simply reverse Steps 1 and 2 above.
Installation
Installation instructions are given below for each ISD model.
ISD-1110-T
1.
Connect the incoming cable to the ISD surge protector.
2.
Connect the outgoing cable to the external device.
3.
Power on the external device or equipment.