– 4 –
– 5 –
– 6 –
www.moxa.com/support
The Americas: +1-714-528-6777 (toll-free: 1-888-669-2872)
Europe: +49-89-3 70 03 99-0
Asia-Pacific: +886-2-8919-1230
China: +86-21-5258-9955 (toll-free: 800-820-5036)
2014 Moxa Inc., All Rights Reserved
Digital Input M12 Pin Assignment
Two DIs using M12 A-coded connectors are located on the rear
panel. The pin assignments are shown in the following figure and
table.
PIN
DIO
1
–
2
–
3
GND
4
DI_1
5
–
6
DI_0
7
DI_SOURCE
8
–
Reset to Default
Use a screwdriver to push in the Reset to Default button on the
rear panel, and then hold it for five seconds. The system will reset
all software settings to their factory default values.
Real-Time Clock
The FLI-1200’s real-time clock is powered by a lithium battery. We
strongly recommend that you do not replace the lithium battery
without help from a qualified Moxa support engineer. If you need
to change the battery, contact the Moxa RMA service team.
WARNING
There is a risk of explosion if the battery is replaced with a
battery that does not have the correct specifications.
Powering Up the FLI-1200
To power on the FLI-1200, connect it to a 24 VDC power source, or
to any Ethernet switch that supports PoE or PoE+. Once the system
is powered and initialized, the Ready LED will light up.
