– 1 –
– 2 –
– 3 –
P/N: 1802013190010
EXPC-1319 Series
Panel Computer
Quick Installation Guide
First Edition, July 2013
1.
Overview
EXPC-1319 panel computers are fanless, durable devices made for
both indoor and outdoor hazardous environments. The EXPC-1319
series features the Intel Atom dual core D525 1.8 GHz processor,
with up to 4 GB of memory available to deliver high performance
processing for the sorts of hazardous environments found in oil
and gas fields.
2.
Model Names and Package Checklist
The EXPC-1319 Series includes the following models:
EXPC-1319-STS-W7E:
Fanless, industrial-rugged Zone 2
19-inch 1000 nits LCD panel computer, single point touch
screen, IP66, dual core Atom D525 CPU, -20 to 60°C operating
temperature
EXPC-1319-STS-IHS-W7E:
Fanless industrial-rugged Zone
2 19-inch 1000 nits LCD panel computer, single point touch
screen, IP66, dual core Atom D525 CPU, -40 to 60°C operating
temperature, with Intelligent Heating Solution (IHS)
EXPC-1319-MTS-W7E:
Fanless industrial-rugged zone 2
19-inch 1000 nits LCD panel computer, multi point touch
screen, IP66, dual core Atom D525 CPU, -20 to 60°C operating
temperature (available on request)
EXPC-1319-MTS-IHS-W7E:
Fanless industrial-rugged Zone
2 19-inch 1000 nits LCD panel computer, multi point touch
screen, IP66, dual core Atom D525 CPU, -40 to 60°C operating
temperature, with Intelligent Heating Solution (IHS) (available
on request)
Each basic system model is shipped with following standard items:
1 EXPC-1319 panel computer
Quick Installation Guide
Documentation & Software DVD
Ethernet Cable: RJ45 to RJ45 cross-over cable, 100 cm
Waterproof USB connector pack x 2
Waterproof DB9 connector pack x 2
Waterproof LAN connector pack x 2
Waterproof power connector pack x 1
Wall mounting kit
Warranty statement
3.
Hardware Installation
Front and Side Views
Rear and Bottom Views
Connecting the Power
The power input connector is located on the left of the bottom
panel. You need to connect the power signal wires to the M12
connector. See the following figure for the pin assignment of the
M12 power connector.
When power has been connected, press Power
button on the front panel to turn on the
computer.
Front Panel LEDs and Buttons
There are six LED indicators and five control buttons on the front
panel.
LED Indicators
Function
Power
On
Power is on.
Off
Power is off.
Heater
(will be enabled
when below -20
℃
)
On
Heater is working.
Off
Heater is not working.
Storage
Blinking
Storage (CF or SSD) is
accessing.
Off
Storage (CF and SSD) is
not accessing.
Fiber
Mfr. reserved
LAN1 & LAN 2
On
Network is transmitting
or receiving data.
Off
Network is not
transmitting or receiving
data.
Control Buttons
Function
Power
Press to turn on the
computer. Press again to
turn off the computer.
Brightness
Press
+
button to
increase the brightness
of the panel. Press
–
button to decrease the
brightness of the panel.
Function
Customizable function
key, can be configured
by an included utility.
Default value enables a
virtual keyboard.
Touch-
screen
Touch to enable the
touchscreen function
(default). Touch again to
disable.
